Lifetime Limited Warranty for as long as you own your home!

1(866) 206-0183

Doorking

  • 1175 Overhead

    The DKS 1175 Overhead Gate Operator is designed for high traffic underground parking applications serving gated communities, apartment complexes, commercial buildings and industrial sites. An optional cover is available. This Operator is not designed for residential applications and should never be used to operate overhead sectional garage doors

  • 6003 Residential Swing Gate Actuator

    DKS 6003 Swing Gate Actuators offer convenience and reliability in a compact, aesthetic  design. These Actuators mount directly to your gate and pilaster, which simplifies installation without the need for concrete pads. The powerful screw-driven pistons in these Actuators connect directly to the gate, eliminating weak mechanical connections, and they are fully enclosed to prevent dirt and other airborne corrosives from contaminating the screw threads. Plus, there is no need to worry about hydraulic leaks, check valves or pumps.

    These Actuators feature built-in limit switches that precisely control the start/stop speed and travel of your gate. The microprocessor-based electronic control board provides many advanced features not typically found in Operators in this class, and with a 24 volt DC operating voltage, DKS Actuators are ideal for residential applications.

  • 6004 Column Mount Swing Gate Operator

    DKS 6004 is ideal to operate swing gates that are mounted on large columns. The 6004 mounts directly on the column and simplifies installation by eliminating the need to cut niches on the column, and there is no need for concrete pads. Using a strong screw drive system, there is no need to worry about hydraulic leaks, check valves, or pumps. The 6004 features a keyed release system that allows the gate to be moved by hand if a system failure should occur.

  • 6005 Swing Gate Actuator

    DKS 6005 Swing Gate Actuators offer convenience and reliability in a compact, aesthetic  design. These Actuators mount directly to your gate and pilaster, which simplifies installation without the need for concrete pads. The powerful screw-driven pistons in these Actuators connect directly to the gate, eliminating weak mechanical connections, and they are fully enclosed to prevent dirt and other airborne corrosives from contaminating the screw threads. Plus, there is no need to worry about hydraulic leaks, check valves or pumps.

    These Actuators feature built-in limit switches that precisely control the start/stop speed and travel of your gate. The microprocessor-based electronic control board provides many advanced features not typically found in Operators in this class, and with a 24 volt DC operating voltage, DKS Actuators are ideal for residential applications.

  • 6050 / 6100 Residential and Commercial

    The unique configuration of these Operators allows the gate arm to rotate from underneath the Operator, enabling the arm to attach to the bottom rail of the gate, were it is virtually unseen from outside the gate. The fully enclosed Operators prevent water from contaminating the output shaft, bearings, and electronics.  Additionally, the frame is built from G90 galvanized steel to prevent rusting. These Operators can be installed directly on a concrete pad, or post-mounted to meet any installation requirements.

    With safety in mind, these Operators contain an electronic and mechanical inherent reverse system for two methods of obstruction detection. The automatic electronic limits, along with the microprocessor-based electronic control board provide advanced features not typically found in Operators in this class.

  • 6300 Commercial and Industrial

    The unique configuration of these Operators allows the gate arm to rotate from underneath the Operator, enabling the arm to attach to the bottom rail of the gate, were it is virtually unseen from outside the gate. The fully enclosed Operators prevent water from contaminating the output shaft, bearings, and electronics.  Additionally, the frame is built from G90 galvanized steel to prevent rusting. These Operators can be installed directly on a concrete pad, or post-mounted to meet any installation requirements.

    With safety in mind, these Operators contain an electronic and mechanical inherent reverse system for two methods of obstruction detection. The automatic electronic limits, along with the microprocessor-based electronic control board provide advanced features not typically found in Operators in this class.

  • 6400 In-Ground Swing Gate Operator

    DKS 6400 installs in-ground, making it virtually invisible – and quiet – satisfying the most sophisticated automation needs without being detrimental to the original gate design. Invisible and powerful, the motor/drive mechanism is constructed in die-cast aluminum with a special corrosion-proof treatment, and because the drive unit is gear-driven, there is no need to worry about hydraulic leaks, check valves, or pumps. 

    The in-ground, self-supporting foundation box is built from corrosion-proof steel and has a galvanized steel cover. A lockable manual release lever is designed so it can be operated from inside or outside the gate.

  • 6500 Commercial and Industrial

    The 6500 Series Operators are designed to operate Vehicular Swing Gates in residential, commercial and industrial applications for both single and bi-parting gates. The Operator swings gates 90 degrees in approximately 12-14 seconds.

    The unique design of this Operator allows for easy access to the electronics and mechanical areas of the Operator without ever having to remove the gate arm. The electronic magnetic limits will never wear out or break and they are easily adjusted. The solid steel frame and belt-driven gear box make this operator one of the quietest on the market today.

  • 6524 Residential and Commercial

    The newest DKS DC Swing Gate Operator is perfect where backup power is critical, as it will keep running even when AC power has been lost. The solar power version is ideal in applications where AC power is unavailable, allowing you to add your own solar system for power, or you can choose the DKS solar kit.

    This Swing Gate Operator offers versatile and safe operation in a small, compact design, and is ideally suited for residential or commercial applications.

  • 6550 Commercial and Industrial

    The 6500 Series Operators are designed to operate Vehicular Swing Gates in residential, commercial and industrial applications for both single and bi-parting gates. The Operator swings gates 90 degrees in approximately 12-14 seconds.

    The unique design of this Operator allows for easy access to the electronics and mechanical areas of the Operator without ever having to remove the gate arm. The electronic magnetic limits will never wear out or break and they are easily adjusted. The solid steel frame and belt-driven gear box make this operator one of the quietest on the market today.

  • 9000 Commercial and Industrial

    The DKS Model 9000 Slide Gate Operator offers powerful and safe access control in a small, compact design. The steel frame and belt drive/gear-box reduction system provide a powerful, yet extremely quiet, slide gate operation. The 9000 uses an advanced microprocessor control circuit with outstanding features. Designed with versatility in mind, these Operators will fit most slide gate operation requirements. These Operators are ideally used in residential, commercial or industrial high-use applications.

  • 9024 Residential and Commercial

    The 9024 can run exclusivly on AC power with battery backup, or solely on solar power.

    The newest DKS DC Slide Gate Operator is a great option where backup power is critical, as it’s designed to keep running when AC power has been lost. The solar power version is ideal in applications where AC power is unavailable, with the option to add your own solar system for power, or you can use the DKS solar kit.

    The DKS 9024 DC Slide Gate Operator offers powerful, yet safe, multifunctional operation all in a small, compact design – ideally suited for residential or commercial applications.

  • 9050 Residential

    DKS 9050 Slide Gate Operator provides durability through high-cycle usage, all in a solid design. The innovative fail-safe design of these Operators significantly reduces the chance of injury or entrapment and makes these Operators the safest residential Slide Gate Operator in the market today. Designed with versatility in mind, the 9050 Operators can be configured for front, center or rear drive applications and can be pad or post mounted. These Operators are ideally used in residential and commercial applications for gate up to 16 ft (4.87 m), 500 lb (227 kg).

  • 9100 Commercial

    DKS 9100 Slide Gate Operator provides durability through high-cycle usage, all in a solid design. The innovative fail-safe design of these Operators significantly reduces the chance of injury or entrapment and makes these Operators the safest residential Slide Gate Operator in the market today. Designed with versatility in mind, the 9100 Operators can be configured for front, center or rear drive applications and can be pad or post mounted. These Operators are ideally used in residential and commercial applications for gates up to 30 ft (9.1m), 1000 lb (453.6 kg).

  • 9150 Commercial and Industrial

    This Slide Gate Operator delivers the convenience of self-setting limits with the safe operation you expect from a DKS Operator. This Operator can be used in residential, commercial or industrial high-use applications, with an innovative fail-safe design which significantly reduces the chance of injury or entrapment and makes this the safest Slide Gate Operator in the market today. Designed to work in many configurations, this Operator can be used for front, center or rear drive applications and can be pad or post mounted.

  • 9200 Series

    DKS 9200 Series Operators are designed for maximum security applications only – such as industrial locations, loading docks, factories, airport security areas, sea ports, etc. Because of the need to prioritize security in these applications, these operators are designed for fail-secure operation and require manual operation to open the gate in the event of a power outage. To enhance security, these operators feature an anti-tailgating circuit and an adjustable partial open feature to help prevent unauthorized vehicle access. In addition, speed controller options allow the user to adjust the gate speed from 1/2 ft/sec up to 4 ft/sec. An Emergency Close feature is available on some models which will close the gate at 4 ft/sec. This assures your security gate is open the absolute minimum amount of time necessary.

  • 9500 Maximum Security

    DKS 9500 series of Vehicular Slide Gate Operators are designed for use on very large and very heavy gates in maximum security applications only. These operators must never be used in applications serving the general public. These heavy duty operators use a high tensile steel alloy roller chain as the pulling medium, which is immune to slippage and the challenges of uneven terrain – and also simplifies installation. User can set the speed of the gate up to 4 ft/sec. (1.2 m/sec.), with an electronic braking option.